Steelcraft-automotive 32210 TAILLIGHT GUARD Manuale Utente Scaricare il pdf

PARTS LIST:

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY.

2. Using a Phillips screwdriver remove the screws from the driver side taillight lens (Figure 2). Note

that inner factory screws will be replaced by #6 x 45mm Sheet Metal Screws and the outer factory

screws with #8 x 50mm Sheet Metal Screws provided in the Hardware Kit. See figure 1.

3. Place Rubber Spacers between the taillight lens and the Tail Light Guard, then position Tail Light Guard

onto lens (Figure 3).

4. Position the guard while inserting the screw into its hole in the lens. NOTE: Taillight Light Guards

will fit either side, left or right. Install the screw tightly enough to keep the guard in place.

5. Install he other three screws. Align the guard with the top of the lens and tighten the screws using

a Phillips screwdriver (Figure 4). Warning! Avoid over tightening to prevent damage

6. Repeat operation with the other side of the vehicle and check that the two guards are parallel to

each other.

PART# 32210 / 32217 Page 1 of 1 12/27/06 (AM)

2 Tail Light Guards 8 Rubber Spacers

4 #6 X 45mm Sheet Metal Screws 8 #8 Flat Washers

4 #8 x 50mm Sheet Metal Screws

INSTALLATION INSTRUCTIONS

07 JEEP Wrangler 2Dr and 4Dr Taillight Guards

PART NUMBER 32210 / 32217

Place Rubber Spacer

between taillight lens

and Tail Light Guard

(8 pcs)

(8 pcs) (4 pcs)

(4 pcs)

Figure 1

Remove

these

screws

Figure 2

Figure 3 Figure 4

Driver Side Shown

#8 x 50mm

Sheet Metal

Screws on

Left Top &

Bottom

#6 x 45mm

Sheet Metal

Screws on

Right Top &

Bottom

INSTALLATION INSTRUCTIONS 1

Sommario

Pagina 1 - INSTALLATION INSTRUCTIONS

PARTS LIST: PROCEDURE:1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY. 2. Using a Phillips screwdriver re

Commenti su questo manuale

Nessun commento

Steelcraft-automotive 32210 TAILLIGHT GUARD Manuale Utente

Navigare online o scaricare Manuale Utente per Per l'auto Steelcraft-automotive 32210 TAILLIGHT GUARD. Steelcraft Automotive 32210 TAILLIGHT GUARD User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Per l'auto Steelcraft-automotive 32210 TAILLIGHT GUARD