Steelcraft-automotive 422800p 4 PREMIUM OVAL SIDE BAR Manuale Utente Scaricare il pdf

SIDEBAR (BENT END)

2010 DODGE RAM 25-3500 MEGA CAB

Page 1 of 4 1/21/10 (DP)

PARTS LIST:

Qty

Description

Qty

Description

Driver/Left Sidebar

12-1.75mm x 40mm Bolt/10-1.5mm Nut Plates

Passenger/Right Sidebar

12-1.75mm x 40mm Bolt Plates

Driver/Left Front Mounting Bracket

12mm x 32mm OD x 3mm Flat Washers

Passenger/Right Front Mounting Bracket

12mm Lock Washers

Driver/Left Front Support Bracket

12mm Hex Nuts

Passenger/Right Front Support Bracket

12mm Plastic Retainers

Driver/Left Center Mounting Bracket

10-1.50mm x 35mm Hex Bolts

Passenger/Right Center Mounting Bracket

10mm x 30mm OD x 2.5mm Flat Washers

Rear Mounting Brackets

10mm x 20mm OD x 2.5mm Flat Washers

Driver/Left Rear Support Mounting Bracket

10mm Lock Washers

Passenger/Right Support Mounting Bracket

10mm Hex Nuts

Rear Support Strap

8-1.25mm x 25mm Hex Bolt

1/2” x 2” Hex Bolts

8mm x 24mm OD x 2mm Flat Washers

1/2” Lock Washers

8mm Lock Washers

1/2” X 1-1/2” OD x 1/8" Flat Washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ

INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.

2. Starting at the driver side-front of the vehicle, remove the tape covering the factory oval holes

in the inner body panel located by the front tire. Partially thread a Plastic Retainer onto the

threaded end of a Bolt and Nut Plate, (Fig 1A). Once you have assembled the Bolt and Nut

Plate, insert it into the factory oval hole. Hold the Bolt end with one hand and tighten the

Plastic Retainer with your other hand. NOTE: Tighten the Plastic Retainer until it is flush

against the side panel, (Figure 2). IMPORTANT: The Plastic Retainer is designed to prevent

the Bolt Plate from falling into the body cavity and to aid in mounting the Bracket.

3. Next, select (1) 12mm Bolt Plate and partially thread a Plastic Retainer onto it. Insert the Bolt

Plate into the forward, smaller oval hole and install as per Step 2, (Fig 1B & 2).

4. Select the driver side front Mounting Bracket. Position the Mounting Bracket onto the installed

Bolt Plates. Secure it with (2) 12mm Flat Washers, (2) 12mm Lock Washers and (2) 12mm

Passenger

Side Rear

Mounting

Bracket

Passenger Side

Front Mounting

Bracket

Driver Side

Rear

Mounting

Bracket

Driver Side

Front Mounting

Bracket

12mm x 40mm Bolt/10mm Nut

Plate (pictured with Plastic

Retainer and 10mm Hex Bolt)

12mm x 40mm Bolt Plate

(pictured with Plastic Retainer

installed for example)

Passenger Side Front

Support Bracket

Driver Side Front

Support Bracket

Driver Side

Center

Mounting

Bracket

Passenger Side Rear

Support Mounting Bracket

Driver Side Rear Support

Mounting Bracket

Passenger Side Center Mounting

Bracket

Rear

Support

Strap

Rear

Support

Strap

Sommario

Pagina 1

SIDEBAR (BENT END) 2010 DODGE RAM 25-3500 MEGA CAB Page 1 of 4

Pagina 2

Commenti su questo manuale

Nessun commento

Steelcraft-automotive 422800p 4 PREMIUM OVAL SIDE BAR Manuale Utente

Navigare online o scaricare Manuale Utente per Per l'auto Steelcraft-automotive 422800p 4 PREMIUM OVAL SIDE BAR. Steelcraft Automotive 422800p 4 PREMIUM OVAL SIDE BAR User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Per l'auto Steelcraft-automotive 422800p 4 PREMIUM OVAL SIDE BAR