Steelcraft-automotive 202220 3 ROUND SIDE BAR Manuale Utente Scaricare il pdf

3" SIDE BARS WITH BENT ENDS

2001-2011 SILVERADO/SIERRA CREW CAB

Page 1 of 3 1/24/11 Rev1(DP)

PARTS LIST:

Driver/Left Side Bar

1/2” ID x 1-1/2" OD x 1/8" Large Flat Washers

Passenger/Right Side Bar

1/2” Lock Washers

Driver Side/Left Front Mounting Bracket

12-1.75mm x120mm x 35mm Hex Bolts Gr.

10.9

Passenger Side/Right Front Mounting Bracket

12mm ID x 32mm OD x 3mm Flat Washers

Center Mounting Brackets

12mm Lock Washers

Driver Side/Left Rear Mounting Bracket

10-1.50mm x 25mm Hex Bolts

Passenger Side/Right Rear Mounting Bracket

10mm Lock Washers

1/2” x 2” Hex Bolts

10mm ID x 27mm OD x 3mm Flat Washers

PROCEDURE:

1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS

CAREFULLY.

2. From underside of vehicle, remove the driver side front body mount bolt, steel washer (if equipped),

and rubber bushing, (Figure 1).

3. Select the driver side front Mounting Bracket. Insert the factory body mount bolt through the Mounting

Bracket and into the steel washer, (if equipped), and rubber bushing. Hang the Mounting Bracket in

position by partially threading the factory body mount bolt up into place, (Figure 2). Repeat this step for

the Center Mounting Bracket, (Figure 3), and the Rear Mounting Bracket, (Figure 4). NOTE: Longer

12mm x 120mm Hex Bolts, 12mm Lock Washers and 12mm x 32mm OD Flat Washers have been

provided to replace the factory body bolts. Use only if necessary. Snug but do not tighten hardware at

this time.

VERY IMPORTANT! There are several different designs, (depending on model year), for the

factory steel body mount bracket, (Figure 1). If necessary, the Front and Rear Mounting

Brackets can be switched, driver side to passenger side, to provide additional clearance

between the gusset on the Mounting Bracket and the factory steel body mount bracket welded

to the frame. To prevent unnecessary noise, adjust the position of all Mounting Brackets

so that once tightened, the Mounting Brackets do not come in contact with the factory

steel body mount bracket.

4. With help position the Side Bar onto the Mounting Brackets. Attach front and rear Mounting Brackets to

Side Bar using the included (2) 1/2” x 2” Hex Bolts, (2) 1/2” Flat Washers and (2) 1/2” Lock Washers,

(Figure 4). Do not tighten at this time.

5. Attach center Mounting Bracket to Side Bar using the included (1) 10-1.50mm x 25mm Hex Bolt, (1)

10mm Flat Washer and (1) 10mm Lock Washer, (Figure 3). IMPORTANT: If threaded insert in Sidebar

does not line up correctly with Center Mounting Bracket, switch Sidebars, driver side to passenger side.

Do not tighten hardware at this time.

Driver/Left Side Rear

Mounting Bracket

Driver/Left Side Front

Mounting Bracket

(2) Center Mounting

Brackets

Passenger/Right Side

Front Mounting Bracket

Passenger/Right Side

Rear Mounting Bracket

1 2 3

Sommario

Pagina 1

3" SIDE BARS WITH BENT ENDS 2001-2011 SILVERADO/SIERRA CREW CAB Page 1 of 3 1/24/11 Rev1(DP) PARTS LIST: 1 Driver/Left Side Bar 4 1/2” I

Pagina 2

3" SIDE BARS WITH BENT ENDS 2001-2011 SILVERADO/SIERRA CREW CAB Page 2 of 3 1/24/11 Rev1(DP) 6. Level and adjust the Side Bar, tighten all har

Pagina 3

3" SIDE BARS WITH BENT ENDS 2001-2011 SILVERADO/SIERRA CREW CAB Page 3 of 3 1/24/11 Rev1(DP) IMPORTANT ALERT: GM uses a very strong thread-loc

Commenti su questo manuale

Nessun commento

Steelcraft-automotive 202220 3 ROUND SIDE BAR Manuale Utente

Navigare online o scaricare Manuale Utente per Per l'auto Steelcraft-automotive 202220 3 ROUND SIDE BAR. Steelcraft Automotive 202220 3 ROUND SIDE BAR User Manual [en] [es] Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Per l'auto Steelcraft-automotive 202220 3 ROUND SIDE BAR